Microporous Titanium Alloy Stem(JX M1102A) (JX T1102D)
1.
The product is designed with a 12/14 standard taper.
2.
The highly polished shoulder and neck design minimizes wear particles produced from the prosthesis impingement during joint motion.
3.
The neck is geometrically designed to increase the range of motion of the joint.
4.
The vacuum plasma titanium spraying technique is used for the proximal surface, the appropriate thickness and porosity of which are favorable for bone ingrowth and provide the optimal long-term fixation strength.
5.
The stepped shallow groove structure converts the shear force into compressive stress during prosthesis implantation, not only enhancing the initial stability during prosthesis implantation, but also increasing the contact area with cancellous bone to facilitate bone ingrowth and provide a good biological fixation effect.
6.
The surface of the middle segment is subject to highly coarse sandblasting to create a complete and natural stem transition and facilitate the balanced transmission of stress on the stem.
7.
The highly polished bullet tip design at the distal end prevents thigh pains due to stress concentration.
Microporous Titanium Alloy Stem (Titanium Coated) (JX T1102D)
Unit (mm)
Product Model |
Specification |
Neck-shaft Angle |
Neck Length |
Stem Length |
Distal Diameter |
S40401 |
1# |
130° |
35 |
141 |
7 |
S40402 |
2# |
130° |
37 |
147 |
8 |
S40403 |
3# |
130° |
37 |
152 |
9 |
S40404 |
4# |
130° |
39 |
157 |
10 |
S40405 |
5# |
130° |
39 |
162 |
11 |
S40406 |
6# |
130° |
41 |
168 |
12 |
S40407 |
7# |
130° |
41 |
174 |
13 |
Note: Corresponding to the microporous titanium alloy stem 12/14 (Ti coated)
Microporous Titanium Alloy Stem (ground) (JX M1102A)
Unit (mm)
Product Model |
Specification |
Neck-shaft Angle |
Neck Length |
Stem Length |
Distal Diameter |
S40301 |
1# |
130° |
35 |
141 |
7 |
S40302 |
2# |
130° |
37 |
147 |
8 |
S40303 |
3# |
130° |
37 |
152 |
9 |
S40304 |
4# |
130° |
39 |
157 |
10 |
S40305 |
5# |
130° |
39 |
162 |
11 |
S40306 |
6# |
130° |
41 |
168 |
12 |
S40307 |
7# |
130° |
41 |
174 |
13 |